This is a very high quality and very correct gallon of 16081 Gloss Navy gray paint. This was used on many US Navy vehicles from WWII and up. This is US Made and is the super high quality Gillespie Coatings brand. This is enamel. This is enamel. Mixing instructions are on the back of the can. This is old school single stage paint. No hardener or any other modern additives to add. Thin with xylene and shoot. This is the correct shade of 16081 and not some off brand industrial paint that some guy has had mixed up just to sell on ebay or his web sight. This is the top of the line and the paint all the serious collectors and the US Military Museum systems use. Just ask any of the serious collectors or military vehicle restorers about the Gillespie Brand. Sorry Over seas buyers. This can not and will not be shipped overseas by us. Shipping to the lower 48 states only.Remember this is old school single stage enamel. This does not need hardener or any additives. If you start adding things you will loose the flat quality of the paint. This will need to be mixed thoroughly and or shaken up before each use. Failure to do so will cause the paint to have a sheen. I can get a complete jeep frame axles and all and about half the tub with one gallon depending on how many coats I use. Remember everyone paints differently so there is no real formula on how exact your coverage will be with a single gallon. I personally use two gallons and 12 spray cans for a jeep restoration and will have a little left over. Paint Shipping Rules: Gallons are shipped in singles, doubles, and cases of four. They can not be combined with any other items due to HAZMAT shipping rules. They will only be shipped FedEx Ground or Home delivery.